KENKO SKYMEMO PINPOINT WEDGE 119522
Produkto numeris: 30905
Galima įsigyti iš tiekėjo: 11 prekės
| Type of Product | Accessories for sliders |
The Kenko SKYMEMO can also be used with field scopes, which normally provide difficulty when determining accurate view ranges through traditional manual methods.
It allows the SKYMEMO mini to tilt up to 90 degrees and has 4 individual thumb screws for making minute adjustments to the position of the head. This makes fine-tuning polar alignment of the Kenko SKYMEMO mini much easier. Additionally, it can also be used with our Kenko PRO1S Spotting Scope, and any DSLR or mirrorless cameras.
- A fine micro adjustment wedge of angle.
- Suitable for use with tracking platform and a spotting scopes.
- Arca-Swiss compatible shoe base.
- Can be used with heads or mounted directly to a camera.
- Ultra lightweight at 250g and supports up to 6kg.
Main features
Bearing Knob
The direction adjustment can be adjusted from a range of +/- 8° (total 16°). 1 turn of knob provides approximately 1.7° movement.
Altitude Adjustment Knob
The altitude adjustment can be adjusted from +/- 10° (total 20°). A single turn of the knob provides approximately 1.7° movement.
Kenko SKYMEMO Pinpoint Wedge is useful for the products that require detailed settings for angles and positions. If you put the products such as the Kenko SKYMEMO mini directly on a tripod, it will be needed to use the tripod lever to adjust the position, but in this case it is very difficult to make fine adjustments.
However, you can adjust the position easily by combining the SKYMEMO Pinpoint Wedge.
ARCA-SWISS COMPATIBLE SHOE BASE
In addition to 1/4" camera screws, it can be attached directly to the Arca compatible shoe base.
Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Micro Motion Head MH-100 Compact micro motion head with fine adjustment For precise adjustment of polar alignment (EQ mode) Can be used with any photo tripod and 1/4inch thread adapter Made of black anodised aluminium and stainless steel Suitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX Also ideal...
BRESSER Tripod with Polar Wedge for photo mount
Tripod with Polar Wedge for photo mount Tripod with Polar Wedge for BRESSER Photo Mount Adjustable stainless steel field tripod Polar wedge and bubble level Large handles for pole height and azimut adjustm. Tripod height max. 125cm Weight tripod with polar wedge: 3.5 kg Carry capacity is up to 5,0 kg
Edelkrone FlexTILT PRIME tripod head with with flexible tilt mechanism
FlexTILT PRIME be rankenėlių dizainu ir lankstiais sąnariais leidžia greitai pasiekti idealų kampą.
K&F Concept 3-Way Geared Tripod Head KF31.047
K&F Concept 3-Way Geared Tripod Head – tikslus 3 krypčių pavarinis trikojis galvutė su mikrometrinėmis rankenėlėmis ir iki 6 kg kėlimo pajėgumu.
K&F Concept KF31.102 Leveling Base Head
K&F Concept KF31.102 lygiavimo pagrindo galvutė su 15° pasvyrimo ir sukimosi reguliavimu bei 3/8" sriegio saskarnėmis.
K&F Concept KF31.127 Three-dimensional gear head 360 panoramic
KF31.127 3-jų krypčių pavarų trikojų galva su 360 laipsnių panoraminiu sukimu ir tiksliomis reguliavimo mygtukais.
