Prekių nėra
SKU: 28528
Model: YN-622TX-N
Ean: 6947110919102
Būklė: Naujas produktas
Prieinamumo data: 19-07-2022
Pristatymas per 7 - 14 dienas
Įspėjimas: Paskutinės prekės sandėlyje!
€ 54.09 su mokesčiais
Type of Product | Trigger |
Compatible | Nikon |
Purpose | For Camera Flashes |
Trigger type | raidītājs |
The Yongnuo 622N-TX is a 2.4GHz wireless radio controller for full control of i-TTL flashes connected to YN-622N triggers. The coded transmission provides an effective interference-free range of up to 100m. The unit features an LCD display for convenient parameter changes. In addition, it has an autofocus assist diode. The controller can operate in 7 transmission channels, the flashes can be divided into 3 independently controlled groups. This will make working with even a large number of flashes convenient.
The device is mounted directly on the camera’s hot shoe or sync cable and is additionally equipped with a PC socket. It is powered by two AA batteries or rechargeable batteries. Yongnuo 622N-TX allows the flash or a group of flashes to operate in i-TTL automatic mode, Super Sync mode or manual mode. It allows flash power setting, EV correction and flash zoom, front and rear curtain flash triggering and supports modelling flash. The controller has a USB socket for updating the internal software (downloadable from the manufacturer’s website).
SPECIFICATIONS:
Trigeru komplekts Canon kamerāmRF-603 allows you a trigger your flash wirelessly up to 270m away. Each unit can work as transmitter or receiver.
Yongnuo RF-603 II allow wireless radio control of the camera and triggering of system and studio lights from up to 270m away. It has a radio remote control function for triggering the camera.
Yongnuo RF-603 II allow wireless radio control of the camera and triggering of system and studio lights from up to 270m away. It has a radio remote control function for triggering the camera.
The Yongnuo YN-E3-RT II radio controller allows wireless control and triggering of compatible flashes. The transmitter operates at 2.4 GHz, which guarantees communication with devices up to 100 m away. YN-E3-RT II can control up to 15 units divided into 5 groups. Such parameters allow to create complex and creative lighting setups from Hollywood.
Works with YN560 III and Later Flashes Supports RF602, RF603, RF603 II, & RF605 Frequency: 2.4 GHz Range: 328' 16 Channels and 6 Groups Remote Power and Zoom Control Updated LCD Layout; Quick-Locking Foot 2.5mm Sync Port Runs on Two AA Batteries
Yongnuo YN560-TX Pro is a groundbreaking radio controller designed for Sony cameras. It features a large backlit screen for excellent working comfort. The controller allows remote control of reporter lights. It allows you to work with devices operating in five groups, offering 16 independent channels. It also provides flash power and torch zoom...
Yongnuo YN32-TX is a modern radio controller designed for Sony cameras and allows you to remotely control reporter lights. It features an easy-to-read screen offering 5 different backlight colors. The controller allows you to work with devices operating in five groups, while offering 16 independent channels. Support for 4 different flash modes (TTL / M /...
Yongnuo 622C-TX is a wireless 2.4 GHz radio controller allows complete control over Speedlights E-TTL triggers connected to the YN-622C.
Yongnuo YN560-TX II is a radio controller for remote triggering of the flash and controlling the operation parameters flash-compatible Yongnuo RF602 and RF603 (YN560 III, IV YN560, YN660, YN860Li).
Yongnuo YN560-TX II is a radio controller for remote triggering of the flash and controlling the operation parameters flash-compatible Yongnuo RF602 and RF603 (YN560 III, IV YN560, YN660, YN860Li).
Yongnuo YN622CII jedenego is the successor of the most advanced radio triggers for system lamps and studio lighting. It enables remote control of individual lamps or groups of lamps. With the 2.4 GHz range, the range of the device reaches 100m.
The flash Yongnuo YN-660 is designed to model lamp strobingu being YN560 development series. It has a built-in driver YN-560TX and receiver triggers the RF-602, RF-603 and RF-605. Works equally well as external flash master and slave.