Benro A573TBS6PRO video statīvs ar galvu
Produkto numeris: 42191
Galima įsigyti iš tiekėjo: 17 prekės
| Type of Product | Tripod Video |
| Tripod set | Pro tripod with head |
| Sections | 3 |
| Material | alumīnija |
With the S6Pro Fluid Head providing balanced support for loads up to 13.2 lb, and the A573T Dual-Tube Aluminum Tripod offering an efficient setup/breakdown workflow as well as stable support, you get an effective solution for professional applications with most cameras. The tripod features a built-in mid-level spreader and the head provides 5+0 steps of counterbalance and continuous pan and tilt drag.
The S6Pro head has a flat base with a 3/8"-16 thread on the bottom, allowing the versatility to move it from the tripod directly to other camera supports, such as sliders. The tripod is designed with a 75mm bowl but includes a half-ball adapter with a 3/8"-16 screw for incorporating the head. The tripod has rubber feet with dual spikes underneath for use on virtually all surfaces.
Combined, the 2-stage tripod and S6Pro head have a height range of 29.5 to 62". The tripod is made of aluminum and the head of magnesium and aluminum, including its knobs. The head comes with a pan bar that can be attached on either side. It also offers two 1/4"-20 threaded holes for attaching articulating arms and other accessories.
S6Pro Fluid Head
- 13.2 lb payload
- 65mm flat base with a 3/8"-16 thread
- Compatible with 65mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
- 5+0 steps of counterbalance
- Continuous pan and tilt drag
- Independent pan and tilt locks
- +90/-75° tilt range
- 360° pan range
- Made of magnesium and aluminum
- Rosette adapters on the left and right side for attaching the included pan bar
- Sliding camera plate with safety lock
- 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
- Two 1/4"-20 threaded holes for accessories
A573T Tripod
- 75mm bowl
- Includes a half-ball adapter with a 3/8"-16 screw
- Rubber feet with dual spikes
- Built-in mid-level spreader
- Height range 29.5 to 62" with the head attached
- Camera Plate
Camera Plate Features | Sliding Balance Plate |
Camera Mounting Screw | 1 x 1/4"-20 Male |
Safety Lock | Yes |
- Head
Base Mount | 3/8"-16 Female |
Counter Balance | Incremental 5-Step Plus 0 |
Pan Handle Fittings | 2 x Rosette |
Bubble Level | 1 x Illuminated |
Accessory Mounting | 2 x 1/4"-20 Female Thread |
Base Diameter | 2.56" / 65 mm |
- Pan & Tilt
Drag Control | Pan: Continuous |
Drag Type | Fluid |
Vertical Tilt | +90° to -75° |
Panning Range | 360° |
Independent Pan Lock | Yes |
Independent Tilt Lock | Yes |
- Legs
Leg Lock Type | Twist Lock |
Leg Sections | 3 |
Feet Features | Rubber, Spiked |
Spreader | Mid-Level (Integrated) |
- General
Load Capacity | 13.2 lb / 5.99 kg |
Maximum Working Height | 62" / 157.48 cm |
Minimum Working Height | 29.5" / 74.93 cm |
Materials | Aluminum, Magnesium |
Weight | 10.3 lb / 4.67 kg |
Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
Benro Slim TSL08AS2CSH Video trikojis komplektas
Benro Slim TSL08AS2CSH yra lengvas ir kompaktiškas aliuminio video trikojis su sklandžia pan ir tilt galvute, skirtas iki 2,5 kg kameroms.
Benro Mach3 TMA28AHD2A Trikojo komplektas su 3 krypčių galvute
Benro Mach3 TMA28AHD2A trikojo komplektas su 3 krypčių galvute, pagamintas iš aliuminio su magnio liejiniais, užtikrina tvirtumą ir lengvumą.
Benro A1683TS2PRO Aero 2 PRO Aluminum Travel Video Tripod with Twist Locks
Aero 2 PRO yra lengviausias ir kompaktiškiausias trikojis, palaikantis iki 5.5 lbs ir galintis virsti monopodu.
Benro A1883FS2Pro travel video statīvs ar galvu
5.5 lb Capacity Flat Base Tripod Head Aluminum 4-Section Tripod Legs Fully Convertible to a Monopod 21.3 to 65" Height Range Independent Pan and Tilt Locks Rubber and Spiked Feet Left/Right Pan Bar Rosette Mounts
Benro A572LLKH Lightning Lock Tripod with KH Head
Benro A572LLKH Lightning Lock trikojis su KH galvute užtikrina greitą surinkimą ir išskirtinį stabilumą profesionaliam vaizdo filmavimui.
Benro C572LLKH Carbon Lightning Lock Tripod with KH Head
Benro C572LLKH anglies pluošto Lightning Lock trikojis su KH galvute – greitas surinkimas, tvirta konstrukcija ir profesionalus vaizdo įrašymas.
Benro FGP18AB1 foto statīvs ar galvu
Load Capacity: 22 lb Max Height: 60.6" Min Height: 14.6" Folded Length: 18.1" Leg Sections: 4 Weight: 3.5 lb Twist Locks Multi-Position Lateral Center Column Integrated Monopod Includes Spiked Feet and Carrying Case
Benro KH25P video statīvs
Benro S8PRO Video Head
Benro S8PRO Video Head vaizdo galvutė su 8 kg keliamąja galia, CNC aliuminio plokštele ir nepriklausomu pan bei tilt trinties valdymu.
Benro T560 stovas
Benro T560 stovas su 3-jų krypčių galvute, maksimalus aukštis 56.5", apkrova iki 5.51 lb. Guminių kojų su metaliniais smaigaisGreito atleidimo plokštėPaminkštinta transportavimo dėžė
