Falcon Eyes Power Supply SP-AC15-10A 4 Pin
Pagal išankstinį užsakymą, pristatymo terminas nežinomas
The Falcon Eyes Power Supply SP-AC15-10A 4 Pin is a separate power supply that you can use with various Falcon Eyes LED lights. The unit consists of a power supply with a 4-pin XLR plug. You can use the SP-AC15-10A as a spare part when you have lost your power cable for example or when you like to have an extra power supply at your disposal. You can use the SP-AC15-10A among others with the following Falcon Eyes lamps;
- RX-24TDX
- SO-108TDX
Please note; You are now looking at the new version of this power supply. Below you will find more information about the two different power supplies.
When a LED lamp is used via the power adapter, any batteries need to be removed for optimal operation (to prevent possible flicker).
- Input: 100-240VAC 50/60Hz
- Output: 15VDC 10A
Two Versions
There are two versions of this power supply. You are now looking at the new version, which is suitable for controllers with the sticker below. This sticker is located on both the controller and the power supply. Do you have a different sticker on your controller/power supply? Or is there no sticker at all? Then you need article number 2906090. This can be found in the optional accessories. An incorrect power supply can damage your equipment. When in doubt you can email a picture of the controller to info@benel.nl.

Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
Falcon Eyes Power Supply SP-AC15-5A 3 Pin Old Type
1x Falcon Eyes Power Supply SP-AC15-5A 3 Pin Old Type
Yongnuo FJ-SW202719005000D AC Adapter - 19 V / 5 A, DC 5.5 / 2.5 mm plug
The Yongnuo FJ-SW202719005000D is an efficient power supply with a compact design, designed for devices requiring 19V DC and 5A amperage. It allows Yongnuo lamps to be powered from 100-240V mains. The power supply is equipped with a classic DC 5.5 / 2.5 mm plug.
Yongnuo FJ-SW20171205000D Power suply - 12 V / 5 A, output DC 5,5 / 2,5 mm
Yongnuo FJ-SW20171205000D is a powerful AC power adapter with a compact design. It was designed for devices that require 12 V and 5 A.
Falcon Eyes Control Unit CX-48TDX for RX-48TDX
1x Spare Control Unit CX-48TDX (for Falcon Eyes RX-48TDX)
Falcon Eyes Soft LED Lamp LPL-S6002TDX 120W
1x LPL-S6002TDX lamp; 1x U-bracket; 1x Controller; 1x Antenna; 1x Power adapter (16.8v, 10A); 1x Velcro for power adapter; 1x Bag
Falcon Eyes Control Unit CX-12TDX II for RX-12TDX II
1x Falcon Eyes Control Unit CX-12TDX II (for Falcon Eyes RX-12TDX II LED panel)
Falcon Eyes Control Unit CX-36TDX II for RX-36TDX II
1x Falcon Eyes Control Unit CX-36TDX II (for Falcon Eyes RX-36TDX II LED panel)