Saramonic BLINK 500 B6 TX+TX+RX UC 2 to 1 - 2,4 GHz wirelss system USB-C Android

Tiny body, huge sound. The versatile sub-compact wireless transmitters that come with the Blink 500 B6 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXUC dual-receiver plugs directly into the USB-C port of your device and it doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works. So advanced, it's effortless. Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot. Perfect levels and power. One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces. Handheld gimbal, meet wireless sound. Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B6 kit changes this story. It's small and lightweight enough to remain mounted to your device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people. An ideal wireless system. Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility. Transmitter Specifications: Frequency: 2.4GHz Oscillator Type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz RF Output Power: 10 mW Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation) Audio Gain Control: 11dB, 18dB, 25dB Plug-In Power: Yes, 1V Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Max Number of Simultaneous Systems: 18 (up to 36 Microphones) Antenna: Built-in 1/4λ Wire Antenna Buttons: On / Off / Pair, Volume Up, Volume Down Battery: Built-in Li-ion 3.7V / 400mAh Approx. Battery Life: 5 hours Charging Connector: USB Type-C (1.5 hours to be fully charged) Input: 1/8'' (3.5mm) Microphone Input Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished Microphone: Built-In Pressure Operated Electret Condenser Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier) Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier) Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier) Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier) Mounting Clip: Built-In Operating Temperature: 0℃ to 50℃ Storage Temperature: -20℃ to +50℃ Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm) Weight: 1.2 oz (34g) Receiver Specifications: Frequency: 2.4GHz Oscillator type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Antenna: Built-in 1/4λ Wire Antenna Connector: USB-C Male Button: Pairing Pinhole Button Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX Operating temperature: 0℃ to 50℃ Storage temperature: -20℃ to +50℃ Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm) Weight: 0.35 oz (10g) 2 x Blink 500 TX Transmitter with Built-In Microphone and Clip 1 x Blink 500 RXUC Dual-Receiver with USB-C Connector 2 x SR-M1 Omnidirectional Lavalier Microphone 2 x Alligator-Style Lavalier Microphone Clip 2 x Foam Lavalier Windscreen 2 x 1’ (30.5 cm) gold-plated USB-C to USB-A charging cable 1 x Pairing Pin