Celestron Diagonal, Mirror 50,8mm XLT - SCT Fit
Produkto numeris: 6696
Produktas užsakomas. Pristatymo laikas nuo 3 savaičių.
There are few telescope accessories that work as hard or matter as much as a diagonal! An integral part of the optical chain, a good diagonal can make a big difference in the quality of the image you see. A 2" diagonal is required if you want to use 2" eyepieces when observing with your telescope. The larger 2" barrel allows you to see a bigger percentage of the telescope's light cone, which works wonders for capturing faint deep sky objects with low surface brightness.
The Celestron 2" Mirror Diagonal was built for superior performance. The housing is machined with precision instruments to make sure the optics stay perfectly aligned. The diagonal's mirror is tested with an interferometer, and is guaranteed to be 1/10 wave or better. The mirror's surface is covered with the same high performance XLT coatings used on Celestron's best telescopes, and the result is a sharp, bright image that will satisfy the most discriminating amateur astronomer.
This 2" diagonal threads securely to the rear cell of standard Schmidt-Cassegrain telescopes. To take advantage of the XLT Diagonal's extra light throughput, insert a 2" eyepiece into the barrel. If you want to use 1.25" eyepieces, slide the included 2" to 1.25" adapter into the eyepiece barrel and secure it with the thumbscrew. When you're not observing, store your diagonal in the included aluminum case for protection.
Features
- 2" SCT mirror diagonal with high performance XLT coatings.
- 1/10th wave mirror is tested with an interferometer to ensure quality.
- Housing is precision machined to achieve and hold good optical alignment.
- Includes a 2" to 1.25" adapter and aluminum carry case.
| Type of Product | Telescope acsessories |
There are few telescope accessories that work as hard or matter as much as a diagonal! An integral part of the optical chain, a good diagonal can make a big difference in the quality of the image you see. A 2" diagonal is required if you want to use 2" eyepieces when observing with your telescope. The larger 2" barrel allows you to see a bigger percentage of the telescope's light cone, which works wonders for capturing faint deep sky objects with low surface brightness.
The Celestron 2" Mirror Diagonal was built for superior performance. The housing is machined with precision instruments to make sure the optics stay perfectly aligned. The diagonal's mirror is tested with an interferometer, and is guaranteed to be 1/10 wave or better. The mirror's surface is covered with the same high performance XLT coatings used on Celestron's best telescopes, and the result is a sharp, bright image that will satisfy the most discriminating amateur astronomer.
This 2" diagonal threads securely to the rear cell of standard Schmidt-Cassegrain telescopes. To take advantage of the XLT Diagonal's extra light throughput, insert a 2" eyepiece into the barrel. If you want to use 1.25" eyepieces, slide the included 2" to 1.25" adapter into the eyepiece barrel and secure it with the thumbscrew. When you're not observing, store your diagonal in the included aluminum case for protection.
Features
- 2" SCT mirror diagonal with high performance XLT coatings.
- 1/10th wave mirror is tested with an interferometer to ensure quality.
- Housing is precision machined to achieve and hold good optical alignment.
- Includes a 2" to 1.25" adapter and aluminum carry case.
Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
Falcon Eyes Mini Ball Head Black MPH-2
Falcon Eyes MPH-2 juodas mini kamuoliuko galvutė – lengvas ir universalus priedas su 3/8" ir 1/4" sriegiu, skirtas patogiam kameros tvirtinimui.
Green Clean LC-7010 Lens Cleaning Tissues 1 Pair
Green Clean LC-7010 servetėlės profesionaliam ir saugiam jautrios optikos valymui, tinka LCD ekranams, ieškikliams, akiniams.
JJC LH-65IIreplacesCanonLens HoodEW-65II
JJC LH-65II replace Canon Lens Hood EW-65II Compatible Products: CANON EF 28mm f/2.8 CANON EF 35mm f/2
Walimex WT-420 Lamp Tripod, 420cm
The very sturdy and stable lamp stand shock absorbers in each section requires minimum storage space excellent price-performance ratio high level of stability max. load capacity: approx. 7,5kg
Falcon Eyes Ball Head + Clamp SH-17
Falcon Eyes SH-17 – tvirtas pavasarinis spaustukas su kamuoliniu galvute ir universalia 1/4" jungtimi patikimam priedų tvirtinimui.
Falcon Eyes Shelf Clamp + Spigot Holder CL-35FL
Falcon Eyes CL-35FL metalinis knaģis skirtas tvirtai pritvirtinti apšvietimo stovus ar spigot adapterius prie stalų, lentynų ar sienų (10-35 mm).
Falcon Eyes Wall Mount MBH-700
Falcon Eyes Wall Mount MBH-700 – universalus metalinis tvirtinimas su spigot laikikliu ir saugos žiedu, skirtas luboms ar sienoms.
JJC LH-4 Lens Hood for Nikkor 20mm f/2.8 D-AF
JJC LH-4 objektyvo gaubtas sumažina atspindžius ir apsaugo Nikkor 20mm f/2.8 D-AF objektyvo priekinį elementą nuo smūgių ir pašalinės šviesos.
JJC LH-N3 Lens Hood For Nikon
JJC LH-N3 replaces NIKON Lens Hood HN-3. Compatible Products: Nikkor 5mm f/1.4 AI-S, Nikkor 35mm f/2, Nikkor 35mm f/2.8 Nikkor 55mm f/2.8 Nikkor 55mm f/3.5 Micro Nikkor 35-80mm D-AF Lenses Material:Aluminum
JJC LN-23 replaces NIKON Lens Hood HN-23 Compatible Products: Nikon 85mm...
Protect your photos from overexposure and lens flare with the JJC HN-23 lens hood. It is suitable for the Nikon AF-D 85mm F/1.8 and Nikon 80-200mm F/4.0 lenses.