Skaarhoj GPI Triggers to SDI Tally SDI-GPI-LINK-V1
Produkto numeris: 49438
Galima įsigyti iš tiekėjo: 2 prekės
| Type of Product | Other Accessories |
| Cleaning type | cits |
From the factory the box is configured to control camera IDs 1-8. When input 1-8 is closed to GND, the red tally flag for camera 1-8 respectively will be set on the SDI output from the box. Likewise input 9-16 (on the same DB25 connector) will result in green tally (preview) being set on the SDI output.
If you want tally control of camera IDs other than 1-8 or if you want just red tally for camera 1-16 for instance, you simply configure the inputs in the web interface.
The SDI input should be connected to your source for the camera return feed. This would typically be a program output and possibly enriched with CCU data via either an ATEM switcher, the SKAARHOJ RCP, or the Blackmagic Arduino Shield. The SDI Tally box passes through all CCU information and only overrides Tally information.
Camera Support
The Blackmagic 3G-SDI Arduino Shield supports the following formats: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.
- SDI-GPI Link
- 12V Power Supply
- USB Programming Cable
- Networking Cable
- UniSketch OS
- Manuals and Software
- Skaarhoj 1 Year Limited Warranty
Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
AVMATRIX Wireless Multi-Camera Tally Light System (8 x Tally Lamps)...
AVMATRIX TS3019-8 belaidė indikatorių sistema iki 8 kamerų su 200 m ryšiu, PTZ valdymu ir keturių lygių ryškumo reguliavimu.
DATAVIDEO TD-3 Bi-Color Tally Light Set
Rinkinys iš 4 dviejų spalvų LED tally šviesų, suderinamų su ITC-100, ITC-200 ir ITC-300 interkomo sistemomis.
Syntex Blackmagic ATEM to Datavideo ITC-100/300 GPI & Tally Cable, 50cm...
Pagamintas Y tipo kabelis Blackmagic ATEM jungikliams ir Datavideo ITC-100/300 interkomams, puikiai tinka tiesioginėms transliacijoms.
Skaarhoj ETH-GPI Link
Universalus konverteris su 8 I/O kanalais, užtikrinantis tikslią signalų kontrolę ir suderinamumą su populiariomis sistemomis.
Skaarhoj ETH-GPI Link Dual
ETH-GPI Link Dual yra universalus konverteris su 16 įėjimų ir 16 išėjimų, užtikrinantis tikslų signalų valdymą.
Skaarhoj ETH-SDI Link
Skaarhoj ETH-SDI Link užtikrina ryšį tarp Ethernet valdymo sistemų ir SDI darbo srautų.
Skaarhoj ETH-SDI Link Converter 18763 - V1
Merge Multiple RCP IP Control Signals Onto a Single SDI Wire Receives “UDP Camera Control” information over Ethernet and forwards it on the SDI out connector. Used to merge network data from multiple RCPs onto a single SDI wire.
