Yongnuo YN560 TX Pro Transmitter for Canon
Pristatymas per 7 - 14 dienas
| Type of Product | Trigger |
| Compatible | Canon |
| Purpose | Multi-purpose |
| Trigger type | raidītājs |
Description
YN560-TX Pro is a breakthrough radio controller from Yongnuo for remote control of reporter lamps. This developmental version of YN560-TX II in a way unifies older RF602/603/605 and YN622 II wireless triggering systems. Among other things, the device allows control of the lamps in five groups, for flash power adjustment, burner zoom, TTL automation and HSS synchronization. The controller is designed for Canon cameras.
Amazing capabilities
– Full support for TTL / M / Multi / GR flash modes
– 16 work channels, 5 independent groups and 10000 configurable photographer IDs
– synchronization for first and second shutter curtain
– synchronization with short HSS shutter speeds
– possibility to compensate for flash power, exposure blocking and exposure bracketing
– operation of remote lamp burner zoom setting
– 2.4 GHz radio signal frequency enables communication over a distance of 100 meters!
Compatible lamps*
The YN560-TX Pro radio controller is able to manage reporter lamps which have a built-in radio receiver.
The following models can be triggered in manual mode:
– YN560 III
– YN560 IV
– YN660
– YN720
– YN860Li
In automatic mode (TTL):
– YN200
– YN685C
– YN685N
– YN862C
– YN968C
– YN968N II
* the complete list of compatibility and supported functions is presented in a separate table
Compatible receivers*
Lamps that do not have a built-in, system-compatible radio receiver can be connected to one of the following models.
– RF-602-RX
– RF-603 II
– RF-605
– YN622C II
– YN622N II
* the complete list of compatibility and supported functions is presented in a separate table
You can see it all in the palm of your hand
The large, easy-to-read LCD display, backlit buttons and intuitive interface ensure comfort and ease of use. You can easily manage a group of several or even several lamps simultaneously!
Quick-connector
The quick-lock mechanism of the footer significantly facilitates and speeds up the installation of the device on the camera sled.
AF support
The controller is equipped with an autofocus assist diode, which significantly facilitates work in low light conditions.
Power supply
YN560-TX Pro is powered by two alkaline or AA rechargeable batteries. The battery compartment is located on the side of the device to allow quick and convenient battery replacement during operation.
Latest firmware
The Yongnuo YN560-TX Pro is equipped with a micro USB port. The latest software can be downloaded from the official Yongnuo website. The manufacturer takes care of continuous development of its products, introducing new updates.
Specification
– model: Yongnuo YN560-TX Pro
– signal frequency: 2.4 GHz
– signal range: up to 100 m
– available work channels: 16
– available lamp groups: 5
– available photographer ID: 10000
– TTL flash power compensation: +/-3 EV in 1/3 EV steps
– manual flash power adjustment: 1/128 – 1/1 with 1/3 EV increments
– Trigger modes:
– manual M
– Stroboscopic Multi
– automatic TTL
– group GR
– power supply: 2x alkaline battery / AA type rechargeable battery
– dimensions: 6.8 x 6.7 x 8.1 cm
– weight: 110 g
– other features:
– large, backlit LCD screen
– clear, illuminated buttons
– intuitive interface
– synchronization to first or second shutter curtain
– Synchronization with short shutter speeds (HSS)
– AF system support
– micro USB socket for software updates
Compatibility
– Canon cameras
– flashing:
– YN200
– YN560 III
– YN560 IV
– YN660
– YN685
– YN720
– YN860Li
– YN862C
– YN968C
– YN968N II
– radio triggers:
– RF602-RX
– RF603 II
– RF605
– YN622C II
– YN622N II
Set contents
– Yongnuo YN560-TX Pro radio controller to Canon
– sleeve
Arba paklauskite apie:
12 kitos prekės toje pačioje kategorijoje
Užsisakyti 
Užsisakyti A set of two Yongnuo RF603C II flash triggers with a C3 for Canon cable
Trigeru komplekts Canon kamerāmRF-603 allows you a trigger your flash wirelessly up to 270m away. Each unit can work as transmitter or receiver.
Užsisakyti Yongnuo YN-E3-RT II radio controller for Canon
Yongnuo YN-E3-RT II radijo kontroleris leidžia belaidį valdymą ir aktyvavimą iki 15 blykstėms iki 100m atstumu.
Užsisakyti Yongnuo YN560-TX II Radio Controller for Sony
Yongnuo YN560-TX II radijo valdiklis Sony kameroms su 2,4 GHz ryšiu, 16 kanalų ir valdymu iki 6 blykstės grupių.
Užsisakyti Yongnuo YN560-TX Pro Radijo valdiklis Sony kameroms
Yongnuo YN560-TX Pro radijo valdiklis Sony kameroms su 2,4 GHz ryšiu, palaiko TTL, rankinį ir grupinį blykstės valdymą iki 100 m atstumu.
Užsisakyti Yongnuo YN32-TX Radio Controller for Sony
Yongnuo YN32-TX radijo valdiklis Sony kameroms su 16 kanalų, 5 grupių palaikymu ir 60 m veikimo nuotoliu.
Užsisakyti Yongnuo YN650EX-RF Speedlite for Canon
Yongnuo YN650EX-RF is a flash designed for Canon cameras. It is distinguished by an oval-shaped burner and built-in LEDs. It also has a built-in transmitter and receiver compatible with the Yongnuo radio triggering system. The flash offers the ability to work in TTL mode and high flash power.
Užsisakyti Yongnuo YN-622C-TX Canon TTL LCD zipsuldzes raidītāis
Yongnuo 622C-TX is a wireless 2.4 GHz radio controller allows complete control over Speedlights E-TTL triggers connected to the YN-622C.
Užsisakyti Radio controller Yongnuo YN560-TX II for Canon
Yongnuo YN560-TX II is a radio controller for remote triggering of the flash and controlling the operation parameters flash-compatible Yongnuo RF602 and RF603 (YN560 III, IV YN560, YN660, YN860Li).
Yongnuo YN-565CII zibspuldze Canon
Yongnuo YN565EX III is the third installment of one of the most popular flash Yongnuo brand on offer, designed to work with Canon cameras. High power, numerous features and remote control make it an essential tool in every photographer's bag.
Užsisakyti Yongnuo YN-622TX-N TTL LCD zipsuldzes raidītāis
Radio trigger YONGNUO yn-TX-622N LCD is compatible with YN-622N wireless flash system. The radio transmission is based on 2.4GHz and works for up to 100m. It can work in 7 channels.